český Deutsch English Español Francais Italiano Português slovenský
Perfluorinated grease, pfpe grease, high vacuum grease, plastic injection grease, long life grease, ejector pin grease, perfluorinated grease spray, perfluorinated grease. complete resistance to all chemical products. compatible with all gases. lifetime lubrication. extreme conditions. HIGH-TECH grease, resolves all lubrication problems. perfluorinated grease, perfluorinated grease aerosol, perfluorinated grease in spray form, perfluorinated grease in a spray can, high-temperature grease, low-temperature grease, grease for gas, grease for oxygen, grease suitable for contact with solvents, very low-temperature grease, very high-temperature grease, plastics processing grease, grease for mould injectors, technical grease, industrial grease. technical grease suppliers. industrial grease suppliers. industrial lubricant suppliers. technical grease manufacturers. industrial grease manufacturers. industrial lubricant manufacturers.

 

Perfluorinated grease for lubrication

in extreme conditions

Can be used in very high and very low temperatures and

under very high loads

Aggressive environments, compatible with all gases including oxygen.

Grease for vacuum lubrication

Very long-lasting lubrication, lubrication providing maximum safety

NEOLUBE® PF 10.00 is suitable for lubrication in large number of cycles
components with reduced functional play

 

 

 

 

 

HEAT RESISTANCE

      Continuous operating temperature

Peak operating temperature

 

 

-25°C  +250°C

-25°C  +260°C

 

 

 

 

LOAD-BEARING CAPACITY

 4-ball test   

ASTM D 2266       wear scar diameter      

ASTM D 2596       weld load index 

 

TIMKEN Test

ASTM D 2509   

Extreme pressure anti-wear                    

 

 

 

0,52 mm

800 daN

 

 

50 lbs

 

 

 

 

SPEED RESISTANCE

 

Rotation factor 

n.dm          

Suitable for low axial or linear speeds

 

 

 

 

 

 

100 000   mm.min-1

 

 

 

 

 

RESISTANCE TO SPECIFIC ENVIRONMENTS

EMCOR TEST       NF T 60 135  

Completely insoluble in water and steam,

including under pressure, in organic

solvents including chlorinated solvents, in strong acids

including nitric acids, strong bases, molten

salt baths, chemical agents and products.

Compatible with gaseous or liquid oxygen up to

123 bar in accordance with EN ISO 11114-3.

Complete resistance to all gases.

Resistance to nuclear radiation up to

70 Gy.

 

 

 

Rating 0/1

    

Perfluorinated grease, pfpe grease, high vacuum grease, plastic injection grease, long life grease, ejector pin grease, perfluorinated grease spray, perfluorinated grease. complete resistance to all chemical products. compatible with all gases. lifetime lubrication. extreme conditions. HIGH-TECH grease, resolves all lubrication problems. perfluorinated grease, perfluorinated grease aerosol, perfluorinated grease in spray form, perfluorinated grease in a spray can, high-temperature grease, low-temperature grease, grease for gas, grease for oxygen, grease suitable for contact with solvents, very low-temperature grease, very high-temperature grease, plastics processing grease, grease for mould injectors, technical grease, industrial grease. technical grease suppliers. industrial grease suppliers. industrial lubricant suppliers. technical grease manufacturers. industrial grease manufacturers. industrial lubricant manufacturers.

Lubrication of vacuum equipment

  

Perfluorinated grease, pfpe grease, high vacuum grease, plastic injection grease, long life grease, ejector pin grease, perfluorinated grease spray, perfluorinated grease. complete resistance to all chemical products. compatible with all gases. lifetime lubrication. extreme conditions. HIGH-TECH grease, resolves all lubrication problems. perfluorinated grease, perfluorinated grease aerosol, perfluorinated grease in spray form, perfluorinated grease in a spray can, high-temperature grease, low-temperature grease, grease for gas, grease for oxygen, grease suitable for contact with solvents, very low-temperature grease, very high-temperature grease, plastics processing grease, grease for mould injectors, technical grease, industrial grease. technical grease suppliers. industrial grease suppliers. industrial lubricant suppliers. technical grease manufacturers. industrial grease manufacturers. industrial lubricant manufacturers.

PF 10.00

Safety lubrication for plastic injection ejectors

 

Perfluorinated grease, pfpe grease, high vacuum grease, plastic injection grease, long life grease, ejector pin grease, perfluorinated grease spray, perfluorinated grease. complete resistance to all chemical products. compatible with all gases. lifetime lubrication. extreme conditions. HIGH-TECH grease, resolves all lubrication problems. perfluorinated grease, perfluorinated grease aerosol, perfluorinated grease in spray form, perfluorinated grease in a spray can, high-temperature grease, low-temperature grease, grease for gas, grease for oxygen, grease suitable for contact with solvents, very low-temperature grease, very high-temperature grease, plastics processing grease, grease for mould injectors, technical grease, industrial grease. technical grease suppliers. industrial grease suppliers. industrial lubricant suppliers. technical grease manufacturers. industrial grease manufacturers. industrial lubricant manufacturers.

Antoine GIRET - Class 3 sand yacht pilot

European Champion 2013 (St Peter-Ording - Germany)

French Champion 2015 (Notre Dame de Monts)

European Championship runner-up 2015 (De Panne - Belgium)

French Champion 2016 (Berck)

European Championship runner-up 2016 (Breteville-Sur-Ay)

Vice world Champion 2018 (St Peter-Ording - Germany)

Continuous salt water spray, sand, impact, vibrations,

Antoine GIRET uses NEOLUBE PF 10, for unlimited lubrication

 

"I have been sand-yachting competitively for twenty years.

After a number of tests, I don't think twice about using NEOLUBE PF 10 to lubricate my bearings.

This sport is practised on the foreshore, in extreme and aggressive conditions:

Continuous seawater and sand spray,

uneven courses producing considerable vibration and shear strain.

In spite of these severe constraints, NEOLUBE PF 10 delivers high performance and durability.

It has allowed me to triple the lifetime of my bearings, and in the process win both national and international titles.

Thank you iBiotec!"

 

Perfluorinated grease, pfpe grease, high vacuum grease, plastic injection grease, long life grease, ejector pin grease, perfluorinated grease spray, perfluorinated grease. complete resistance to all chemical products. compatible with all gases. lifetime lubrication. extreme conditions. HIGH-TECH grease, resolves all lubrication problems. perfluorinated grease, perfluorinated grease aerosol, perfluorinated grease in spray form, perfluorinated grease in a spray can, high-temperature grease, low-temperature grease, grease for gas, grease for oxygen, grease suitable for contact with solvents, very low-temperature grease, very high-temperature grease, plastics processing grease, grease for mould injectors, technical grease, industrial grease. technical grease suppliers. industrial grease suppliers. industrial lubricant suppliers. technical grease manufacturers. industrial grease manufacturers. industrial lubricant manufacturers.

 

 

 

 Download our product catalogue - Edition September 2018

 

Looking for another product?

Discover our entire range by clicking on the photo

Perfluorinated grease, pfpe grease, high vacuum grease, plastic injection grease, long life grease, ejector pin grease, perfluorinated grease spray, perfluorinated grease. complete resistance to all chemical products. compatible with all gases. lifetime lubrication. extreme conditions. HIGH-TECH grease, resolves all lubrication problems. perfluorinated grease, perfluorinated grease aerosol, perfluorinated grease in spray form, perfluorinated grease in a spray can, high-temperature grease, low-temperature grease, grease for gas, grease for oxygen, grease suitable for contact with solvents, very low-temperature grease, very high-temperature grease, plastics processing grease, grease for mould injectors, technical grease, industrial grease. technical grease suppliers. industrial grease suppliers. industrial lubricant suppliers. technical grease manufacturers. industrial grease manufacturers. industrial lubricant manufacturers.

 

Manufacturing, lubrification, cleansing, protection,
IBiotec
® Tec Industries® Service
offers a wide range of products reserved for industrial area

 


 If you wish for :

 

a free sample
a technical advice
a product data sheet
a safety data sheet

 

- Please contact us -

 


IBiotec® Tec Industries®Service
manufacturer of technical chemical products.
Welcome to our website.



IBiotec® Tec Industries®Service is on : YOUTUBE